Affinitech

Optional removable front (with instant access or traditional sleeved ports) to enable the transfer of larger batches of samples or pieces of equipment for use inside the chamber.
Built-in rapid airlock allows the transfer of plates in just 60 seconds.
Colour, touch-screen control panel for ease of use and for visual display of parameters such as temperature, humidity, and airlock cycle status.
Reminder to perform calibration can be set for between 7 and 21 days.
Save time with the automatic commissioning cycle.

Accommodates up to 1,200 x 90mm Petri dishes.
Data download facility that allows you to record workstation parameters and download stored data in seconds for traceability and reference.
Removable front as standard on the right-hand half of the unit to facilitate the transfer of bulk samples or larger pieces of equipment for use inside the workstation.
Colour, touchscreen control panel for ease of use and for visual display of parameters such as temperature, humidity, and airlock cycle status.
Ethernet-enabled for remote access to touchscreen.
Comes complete with custom-designed trolley.
Automatic commissioning cycle to save you time and resources.

Each porthole also acts as a mini-airlock so you can transfer up to 10 plates each time you insert or withdraw your arms, so reducing airlock cycles and gas usage.
Colour, touch-screen control panel for ease of use and for visual display of parameters such as temperature, humidity, and airlock cycle status.
Optional refrigeration unit available if you are working with organisms that need low temperature incubation or storage conditions.
Reminder to perform calibration can be set for between 7 and 21 days.
Automatic commissioning cycle to save you time and resources.

Two oval ports enable you to work gloved or bare handed.
Each porthole also acts as a mini-airlock so you can transfer up to 10 plates each time you insert or withdraw your arms, so reducing airlock cycles and gas usage.
Colour, touch-screen control panel for ease of use and for visual display of parameters such as temperature, humidity, and airlock cycle status.
Reminder to perform calibration can be set for between 7 and 21 days.
Optional Whitley Internal HEPA Filtration option.
Automatic commissioning cycle to save you time and resources.

Two patented oval ports enable you to work comfortably, gloved or bare handed.
Rather than use off-the-shelf HEPA filters, DWS has worked with one of the world’s leading filter manufacturers to develop a filter specifically tailored to suit this workstation.
Levels of atmospheric cleanliness inside the workstation exceeds the requirements of ISO 14644 Class 3 (equivalent to Class 1 of the US Fed Std 209E Cleanroom Standards and exceeds the particle counts attained at rest’ (without an operator) of Grade A as set out in the GMP Guidelines). We can provide test results confirming particulate levels inside the workstation.
Fitted with a fan that circulates the internal atmosphere continuously – contributing to even temperature distribution and ensuring any internal particulate will be in motion.
A removable front enables the transfer of larger batches of samples or pieces of equipment for use inside the chamber.
Colour, touch screen control panel for ease of use and for visual display of parameters such as temperature, humidity and airlock cycle status.
Other options to tailor the workstation to your requirements include: single sample entry system; cable glands; shelves and data logging.

Four patented oval ports enable you to work comfortably, gloved or bare handed. With two sets of ports, two researchers can work in the chamber side-by-side.
Rather than use off-the-shelf HEPA filters, DWS has worked with one of the world’s leading filter manufacturers to develop a filter specifically tailored to suit this workstation.
Levels of atmospheric cleanliness inside the workstation exceeds the requirements of ISO 14644 Class 3 (equivalent to Class 1 of the US Fed Std 209E Cleanroom Standards and exceeds the particle counts attained at rest’ (without an operator) of Grade A as set out in the GMP Guidelines). We can provide test results confirming particulate levels inside the workstation.
Fitted with a fan that circulates the internal atmosphere continuously – contributing to even temperature distribution and ensuring any internal particulate will be in motion.
Two removable fronts to enable the transfer of larger batches of samples or pieces of equipment for use inside the chamber.
Colour, touch screen control panel for ease of use and for visual display of parameters such as temperature, humidity and airlock cycle status.
Other options to tailor the workstation to your requirements include: front loading single sample entry system; cable glands; shelves and data logging.

A single microaerobic cycle is completed in just 19 seconds; a single anaerobic cycle takes just 1 minute and 55 seconds (not including catalyst check), and a single capnophilic cycle takes just 3 seconds.
A full colour touchscreen control panel allows intuitive selection of parameters.
Easy to use, so no complicated operator training is required.
Capnophilic option available.
Can gas three jars simultaneously (with the same atmosphere).
Adaptor kit available to enable the use of existing jars, including a variety of gas jars from other manufacturers.

Microaerobic Workstations